System to identify the vehicles through the wireless RFID TAG reader that is installed in the vehicles.
The reader is installed in the dispenser with a support that also acts as the reader battery charger.
The battery charge is made by magnetic induction and without any touch. Only hanging the reader, the battery starts the charging process.
The pump is not switched on until the reader is in its support in order to avoid the user leaves it anywhere else.
If the reader is moved more than 15 metres away the dispenser, it is activated an acoustic alarm.
APPLICATION
When the GK-7 controller asks for the vehicle identification, pass the reader at a distance of 5 cm over the TAG disc installed in the vehicle.
When passing the reader, a “beep” will sound confirming the TAG reading. Then the controller display will show the message “Hang the reader”. When hung the reader, you will be able to start the supply.
COMPONENTS
Wireless proximity reader for a personal and non-transferable identification of the vehicles.
TAG KEYRING: Identifier system to identify the user. It is possible to configure the system so that the user is able to be identified only through a numerical code (PIN) or with the TAG KEYRING.
TAG DISC: Identifier system to be fixed in the vehicle.
The disc has an inner hole that allows to be fixed with a rivet, screw, etc.
To identify the vehicle the user should pass the reader, at a distance of 5 cm, over the TAG DISC installed in the vehicle. Then, the vehicle will be automatically identified.
The dispenser will not start until the reader is hung again in its support.
The reader has an internal battery that is automatically charged when it is is in its support.
COMPATIBILITIES
Compatible with the GK-7C controller and the COMPACT, TOTEM and SHK dispenser models
It replaces the magnetic key reader (iButton)
It is not compatible with the controller that uses the communication kit via memory key (iButton).
It is not compatible with the iButton identification either.
