Series M METERS · ATEX

25 to 3,000 l/min · ±0.2 % 1 1/2" to 6"

Дизель

Бензин

The M series meter is a positive displacement meter for liquids. It is designed for liquid measurement both in transfer and process control. Because of its design, it is easy to keep and can suit a wide range of applications.
The M series rotary flow meter has a simple and efficient design consisting of a housing and three rotors that rotate in unison (at the same time) within the measuring chamber.
The absence of wear, from no metal-to-metal contact inside the chamber, eliminates any deterioration in accuracy and provides a long service life.
The rotors are composed of bearings inserted into two bearing plates, where at the end of each rotor shaft there is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which gives a consistent and superior measurement of accuracy.

FEATURES

It has built in an air eliminator.
The excellent stepless adjusting device allows a micro-adjustment of the meter.
High accuracy and repeatability over the widest range of flow, superior accuracy at constant flow;
Low maintenance, no metal-to-metal contact in measuring chamber, long life service;
Accuracy regardless of the pressure fluctuations, temperature variation, viscosity;
Aluminium body, Viton seal;
Standard measurement in Litres / US GAL / IMP GAL (please, ask for it when ordering);
It includes a strainer with a mesh of 80/170 μm (micron).

TECHNICAL DATA:

*It is possible to configure the meter with custom specifications according to your needs.

OPTIONAL

M-40 · HIGH FLOW MECHANICAL METER

808318005

M-50 · HIGH FLOW MECHANICAL METER

808318004

M-80 · HIGH FLOW MECHANICAL METER

808318003

M-100 · HIGH FLOW MECHANICAL METER

808318002

M-150 · HIGH FLOW MECHANICAL METER

808318045

*Available with mechanical register, pulser or electronic display GE

GE · DISPLAY WITH HOSE MODULE

MGE-400 · ELECTRONIC